Product
Summary
The
CNC 300 is a control for Automec
backgauges that can be programmed to be
simple or programmed to utilize an array
of sophisticated functions. These include
a tool library, RS232 computer interface
with software, automatic ram referencing,
ram angle mode, backgauge reversal on
pinch point, and a parts counter.
Back
to top
Multilevel
Sophistication
An 11-digit
alphanumeric parts description can be
input at the off-line computer and a
setup sheet with tool parameters and
bending information can be quickly
printed for systematic duplication of
setups.
With
the CNC300, the user decides what level
of sophistication he wants out of the
control and when he wants to implement it.
All systems are built the same but if the
operator decides not to enter such
information as tooling parameters, the
system can be calibrated and operated in
the traditional depth mode without
entering the tooling information.
Back
to top
Teach
Mode
You
simply bring the press brake ram to the
correct bending angle for each step of
the program and press just one button to
program that position.
Back
to top
Off-line
Programming
The
CNC300 means a simple, low cost, durable
control on the shop floor with the
ability to control job parameters from an
off-line computer to reduce setup time.
The jobs can be set up on the shop floor
and uploaded to the computer for future
runs or can be programmed in the office
and downloaded to the CNC300 at the press
brake.
In
either case the operator can easily make
changes on the CNC300 to correct for
minor variations without disturbing the
jobs stored in the computer memory.
Back
to top
Angle
Mode with Angle Correction
When
programming in degrees the actual angle
can vary from the programmed angle due to
material thickness variations or
springback. Simply program your measured
CNC angle and the CNC300 will adjust
automatically to correct the programmed
angle.
Back
to top
Standard
Features
- Automatic
ram calibration to tool heights*
- RS232
Interface and software included
- 300
jobs
- Tool
library
- Depth
or Angle mode
- Angle
Adjust for angle correction
- Backgauge
Reversal on Pinch Point (time and
distance)
- Parts
Counter
- IN/MM
conversion
- Single
entry Ram offset and Bend
Allowance
- 11
digit job number
- Teach
Mode
- Tactile
feel push buttons
Back
to top
Optional
Features
R-axis
programmable gauge bar with automatic
referencing to lower die
- 48"
backgauge travel for heavy plate
forming
- 1,2,
and 3 axes available
Back
to top
* This feature is contingent on press
brake type
|
