Product Summary

The graphical programming, bend sequence computation and 2D simulation provide the used the most user-friendly and fast programmable CNC for press brakes ever built.

Programming the Delem DA-65 is simply drawing the profile of your product on the screen. The bend expert program automatically calculates the optimum bending sequence whereafter you can watch a 2D simulation of your product showing you how to place it in the machine.

Knowing the bend sequence and which tools to use, the DA-65 helps you to save money because the easy way of using it saves a lot of time involved with trial and error on your machine.

Its new state of the art electronics and the new modular architecture offer you many other advantages such as:

• Optional Flash disk for those who need mass storage of the many parts they handle. §
  
• Error message system and help texts to warn you for faulty programming, operation errors and machine failures. This saves a lot of time finding out what is wrong.
  
• RS232 or an optional Ethernet interface for flexible DNC operations with download of part program and/or part drawings.
  
• Barcode reader interface for automatic product selection.

Back to top

Technical Specifications

General | Programming Specifications | Computer Functions | Optional Functions |
Axis Control | Interfaces | Miscellaneous

General

• 12 inch CRT display (VGA, 4 greyscales) -
  
• Memory capacity:
  2.500 program steps
  90 tools
  10 upper machine shapes
  10 under machine shapes
• Program number, 7 digits
• Drawing number 20 digits alpha-numeric
• Program repeat max. 9,999
• Step number, 25 max. (sequences)
• Step repeat, 99 max.
• Memory storage on floppy (3.5" HD)
• Operator selectable language
• Handwheel movement of all axes
• PLC functions
• Annunciator system
• Machine time counter

Back to technical specifications

Program specifications

      
Back to technical specifications


Computer Functions

• Muting
  
• Tooling safety zones
  
• Pinching point
  
• Press force in KN
  
• Bend allowance
  
• Crowning adjustment
  
• R axis position (R1-R2)
  
• Z axis position (Z1-Z2)
  
• Decompression
  
• Millimetres / inches
  
• Developed length
  
• Bottoming force
  
• Auto bumping calculation
  
• "Lay-on" support back gauge
  
  

Back to technical specifications


Optional Functions

• Tandem operation
  
• Part support control
  
• X1-X2 angle programming
  
• Ethernet interface
  
• Flash disk card for memory extension
  
• Barcode reader interface
  
• Remote diagnosis

Back to technical specifications


Axis Control (Modusys architecture)

Back to technical specifications


Interfaces

• DNC-RS 232C, bi-directional
  
• Additional high speed bussystem (up to 24 modules)
  
• PC - 104 connector

Back to technical specifications


Miscellaneous

• Diagnostic Program
  
• Many dialogue languages
  
• Help texts
  
• "Teach-in" on Y and X axis
  

Back to top