LAMBA STRAIGHT SIDE PRESSES

AVAILABLE WITH VARIABLE SPEEDS
 
 

SPECIFICATIONS

STRAIGHT SIDE DOUBLE CRANK SERIES

US measurements (inches)
MODEL SSDC 110 SSDC 160 SSDC 200 SSDC 250 SSDC 300 SSDC 400 SSDC 500
Capacity (US Tons) 125 175 220 275 330 440 550
Bed area (L-R x F-B) 72 X 36 72 X 36 108 X 48 108 X 48 120 X 60 120 X 60 125 X 65
Slide area (L-R x F-B) 72 X 32 72 X 32 108 X 44 108 X 44 120 X 55 120 X 55 125 X 60
Stroke length:...(Std. Speed. 6 8 10 12 12 14 16
..........................High Speed 3 5 6 8 8 10 10
Strokes / min:.... Std. Speed 35 to 70 35 to 65 30 to 60 20 to 40 20 to 40 15 to 30 12 to 25
......... High Speed 55 to 100 50 to 90 40 to 85 30 to 70 30 to 70 25 to 50 20 to 40
Shut Height:...... Std. Speed 18 20 22 24 26 30 34
......................... High Speed 21 23 26 28 30 34 40
Slide adjustment 4 5 6 6 6 7 8
Bolster thickness 6 6 7 7 8 9 10
Bolster height to floor 36 36 36 36 36 40 40
Main motor:........Flywheel 20 HP 25 HP 30 HP 40 HP 40 HP 50 HP 60 HP
Type of clutch & brake Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic
Overall press height 156 176 195 200 210 220 250
Machine weight 64,000 Lbs. 74,500 Lbs. 87,500 Lbs. 107,500 Lbs. 119,500 Lbs. 138,500 Lbs. 183,600 Lbs

    Note

STANDARD FEATURES:  
  • Extra heavy steel fabricated reinforced, stress relieved frames with tie rod construction.
  • Yasagawa (Japanese) brake motor for slide adjustment and micro adjustment.
  • High torq pneumatic clutch. Wet clutches are optional.
  • Nishibi (Japanese) die height motor.
  • Steel fabricated rams with phinolic or turcite linings. 8 point guiding.
  • Lincoln automatic recirculating lubrication (German)
    • Long barrel type slide adjustment screws.
  • Air counter balances
  • Pascal (Japanese) hydraulic overload protection & de-jamming system.
  • Phosphorous bronze bushings & ball cups, with adjustment for ball cup clearance.
  • Resolver based Allen Bradley / G.E. controls with dual micro processors comforming to all OSHA / NIEMA / CE saftey standards.
  • Alloy cranks
  • Herion dual solonoid valves for clutch operations
  • Hardened & ground double gears running in oil bath.
  • Pneumatics from Japanese / French Manufactures
  • Knockout mechanism..
   
OPTIONAL FEATURES:  
  • Die protection to monitor up to 16 sensor locations
  • Photo electric guards
  • Variable speed drive
  • Ejector
  • Die cushion
  • Pneumatic knockouts
  • Hydraulic die clamps
  • Flywheel brake
  • Die lifters
  • Power takeoff shaft
  • Coil & strip feeders
  • Programmable shut height control
   

RETURN TO LAMBA PRESS INDEX

HOME

MACHINE TOOLS & AUTOMATION